Pot saucer with pouring spout

I made this in order to pour water from any regular bottle easily and see the level at the same time.

This object is optimized for both 0.4 and 0.6 nozzles thanks to the 2.4 mm wall thickness.

Bottom Ø : 100 mm
Top Ø : 110 mm

Recommended settings :
Layer height : +0.25 mm.
Permieters : 3 or 2 according to your nozzle's diameter.
Infill : 100%

Tip : if the print is not 100% waterproof, apply some epoxy resin/spray. Once it's dry, the overall print will be not only waterproof but also stronger.