September 29, 2023
Description
Liked the Spider Web Lantern LED Tealight by @laptopguy, but needed it to hang outside for my Halloween props. I did not want to mess with glue, so I made a frame for the sides to slide in (like glass panes). Also wanted it larger, so I remixed it.
Printed with Overture PC Professional. Tolerances are tight, so use care fitting pieces together.
Black filament for base, roof, ring, and spider. Transparent for sides. 0.2mm with 15% gyroid infill for base/5% gyroid for roof.
Used a LED tealight with 6hr auto on/off feature.
Sides slide into the slots. Print 4 sides with or without spider (your choice). Use tree support for spider. For different color spider, change color at layer 8 (if using 0.2mm layers).
Top screws into the frame using M3x10 cap head screws. Don't use longer than M3x15mm!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
dallasstarsfan
