Volvo M56 Drive Shaft Plug - 999 5488

General

A little 40mm plug with a knob to plug the drive shaft holes of a Volvo M56 gearbox (or any other transmission with 40mm diameter seals).

This can be considered a substitution for the Volvo special tool 999 5488.

Recommended Material & Print Settings

• Any material is fine, PLA was used for the plug shown in the pictures.
• ≥2 perimeters recommended, 10% or less infill is sufficient
• The part should be printable with most printers and materials without any supports.

Please consider liking the model and posting a Make. It took a lot of revisions and a lot of filament and O-rings to get this right.