Mobile/Travel Apple Watch Charger USB C

Mobile/travel charger for your Apple Watch! It can be used either by leaving the connector in the body or you can pull on the connector and some wire will come out if it has been coiled properly. It is not recommended to use the charger while the connector is retracted all the way while being unsupported from the bottom. 

It has been tested with both of the 1 meter 2023 USB C Apple Watch fast chargers (MT0H3AM/A, MLWJ3AM/A), braided and non braided. For the smoothest operation when pulling the cable out, it is recommended to use the braided version of the Apple Watch charger. 

This print has been tested with ABS and PLA. PETG should also work well. Clearances are very tight on getting the puck into the print. Some force is required to place it in the printed part. It can be removed by pushing it out from the inside. 

Print Settings:

• 2-4 walls/perimeters
• 5 top and bottom layers
• 15-30% infill
• No supports needed! Parts are already oriented correctly. 

Bill of Materials:

• 4x Heat Set Inserts (M3x5x4) (USA Option)
  • Heat insert tool (Optional)
  • Kit option (Includes tool and heat inserts)
• 4x M3 x 10 SHCS Screws, M3 x 8mm SHCS should also work.

Buy me a coffee

If you like my work, you can buy me a coffee!

Don't have a 3D printer?

Not a problem! I offer this print in my Etsy shop!