March 9, 2021
Description
I totally loved the lamp by Nikolaos Babetas that can be found here so I made it BIG. I simplified the design by only using 3 components instead of using the battery system so what you'll need is:
Image of wiring included just make sure you are not powering the LEDs with the D1 Mini because it will become a resistor and get hot.
Printing Guide:
All parts minus the dome should be printed with 0.45mm layer widths and 0.2mm layer height. The dome should be printed in Spiral Vase mode with 0.55mm layer width at 0.2mm layer height and 6 bottom layers.
License:
Creative Commons — Attribution — Share Alike
Mr 3d Print Wizard
