Johnny Silverhand (pre-supported)

Basic information

Johnny comes in two parts. A bust part, and a base part, which are printed separately.

There are separate FDM and RESIN versions of the STL files. The difference is the amount of detail, or resolution, if you like, with the RESIN version having more details. You can print the RESIN files on an FDM machine if you like, and vice versa.

Printing instructions

FDM

Technically you should be able to print this guy without supports, BUT I’d put some down in the marked spots below just to be on the safe side, especially if you know your print bed adhesion is a bit iffy and your printer doesn’t handle overhangs super well. Might want them regardless, since this print will be leaning quite a bit and it won’t hurt having the extra stability 😅

Resin