(Similar to) Oogie Boogie Three-Color Earrings

A THREE COLOR PLA printed earring set printed with a .6 nozzle. Entire earring from mount to bottom is approximately 50mm as printed. Get a jewelry kit from your favorite place and assemble… just in time for the Halloween season. 

This earring in the pictures was printed with regular orange PLA and has a color change at around layer 10. First layer of the new color (regular black) starts at layer 11, ends at 12 and the eyes/mouth start at 13.  This math only works with .2 layers, use your slicer to determine the layer change. I used ironing to help control the infill lines. 

V2 update, larger smile for .6 and .4 nozzle printing. Adjusted height to use slightly less filament and time. 

Feel free to print, but PLEASE do not sell these for commercial purposes. I put the design effort into these to share, not to be abused. 

***Disclaimer: these are similar to a trademarked character, and not intended to be a direct representation of the trademarked item. The design was inspired by, but not a copy of the intellectual property.***

IF you try to sell these against license commercially… there is a very aggressive company that may start sending you letters that I promise you won't win against.