Tall Phone Stand (14cm)

NO SUPPORTS NEEDED!
Everything is angled nicely, and gaps are short enough that supports aren't needed.

I recommend printing on the Y axis (see last image), for stability.

Example printed with PLA+ on an Ender 3 V2 Neo, print time was around 6h 30m

Print Info:
Nozzle Size: 0.4mm
Layer Height: 0.2mm
Infill: 10% (Lines)
Walls: 2
Top/Bottom: 4 Layers (could easily do 3, but I forgot to change)
Supports: Not needed

Model Info:
Full Height: 193mm
Phone support Height: 140mm
Width: 60mm
Depth: 80mm
Weight: 50g (print settings depending)

Design with my other half in mind, she can now see over my big head when we're watching something in bed on a phone, ha!