6004 adjustable bearing mount!

Many thanks to TechTom for his super cool bearings. I have been using the 6004 for my little projects all over! Here is my attempt at an adjustable, press mount fitting for his bearing. It consists of 2 simple parts. 

The Swivel Cap is press fit directly into the opening of the bearing. I prefer have the open end face down, then press the bearing down until the open face and bearing face at flush on a flat surface.

Then, press the bearing assembly onto the Swivel Mount. You can then adjust the angle of the bearing for your purposes.

Once you have the bearing in place, you can glue everything together. Alternatively you could just merge the cap and bearing so it's one piece too.

If you need the mount to be longer, import the stl for the mount, edit, grab the face that needs to be longer, and extrude region to fit your needs.

TechTom's bearings are here :  https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements

I'll post a video of assembly on my YT channel and update this with that link so you can see this in action.