October 2, 2023
Description
Uses the screws and spacers that came with the amplifier board kit.
Steps to assemble:
1. First prepare the top part by fastening the spacers with 4 screws on it.
2. Place the board into the bottom of the enclosure
3. Slide the top part potentiometer hole over the volume potentiometer shaft at an agle, then align it with the bottom part.
4. Secure the bottom part with the remaining screws.
No supports required if printing in orientation shown in the attached slicer screenshot.
Update: The "_v2" set has the back panel opening 2 mm wider, to accommodate some crimping connectors.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
AXUL
