CMMG Bolt Case With Slide Cover

This is a case that will hold the CMMG 22LR conversion bolt for an AR-15. It also doubles as a regular Bolt carrier group case as well. The Bolt is almost a perfect fit and very little wiggle room. If you want more clearances for the bolt you can scale it up 1-2% but you have to do this to the lid as well or they wont fit right. 

.02 at 15% infill is sufficient. No supports are needed. If you have issues with bed adhesion use extra precautions as long thin prints sometimes tend to curl.

If you'd rather print this with a slip cover you can find it HERE.