October 12, 2023
Description
A custom cover I made for my Enderwire mod, but can be used for any application of the LS350. Be aware that there seem to be versions with 24V and 12V fans out there.
POWER SUPPLIES ARE VERY DANGEROUS EVEN WHEN NOT CONNECTED TO POWER FOR A LONG TIME. MODIFY AT OWN RISK!
You can use any 80mm fan. For the Enderwire a 80x80x20 fan is perfect as it will align with the bottom panel (in which you need to cut a hole). I also added a spacer I use to align my 80x80x15 fan, scale at will.
I used a drill to cut a hole above the fan into the bottom panel, you can use the fan grill to make it looks pretty :)
See it in my build:
License:
Creative Commons — Attribution — Share Alike
7
Crys' Livingroom Workbench
