October 1, 2023
Description
A simple and perfect box to contain two mk4 hotend assemblies.
I personally prefer to use socks on my hotends so this project is just the right size for them. However, I also attach the step and f3d files to allow you to make any type of modification necessary for every need.
In the basic configuration you need six M3x25mm screws, you can change this parameter within the fusion 360 project.
The seal is not necessary for the operation of the box.
Hotends should be placed in the box with the heater and thermostat wires facing up.
Have a nice print!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Mandog
