October 7, 2023
Description
This is a quick and easy to print mount for the BigTreeTech Smart Filament Sensor v2.0 to attach it to a 2020 extrusion.
My print settings were 0.2mm layer height, 20% infill, using petg.
The sensor attaches to the mount via the 3 screws that came with the sensor and then it can be attached to an extrusion by a couple of t-nuts.
If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.
I've included the step and f3d files in case anyone wants to modify my design.
License:
Creative Commons — Attribution
7
Si_22
