October 3, 2023
Description
itachi scene made using hueforge
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Cream Transmission Distance: 2
PLA 123-3d orange Transmission Distance: 3.5 ( color code #eb860b)
PLA 123-3d red Transmission Distance: 2.7 ( color code #ff1000)
PLA 123-3d black Transmission Distance: 0.5
Swap Instructions:
Start with Cream
At layer #8 (0.44mm) swap to orange
At layer #9 (0.48mm) swap to red
At layer #16 (0.76mm) swap to black for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
thom
