LED Light Mount for the Original Prusa Enclosure

This is a simple light mount for the Original Prusa Enclosures. It mounts using two of the factory screw holes in the enclosure, and the wires are secured with zip ties. Designed to work with the following parts, though others may work as well:

24v LEDs: https://www.amazon.com/dp/B09N3L7KJ4 (cut off just 4 segments, it's very bright)

Switch: https://www.amazon.com/gp/product/B07S2QJKTX 

Thermal Inserts: https://www.amazon.com/gp/product/B0BTYF2MMD

Terminal Forks: https://www.amazon.com/gp/product/B0B2JBRSP1

Any small gauge wire should work fine, but I love this stuff: https://www.amazon.com/dp/B09ZTN66N1?th=1 (24ga silicone sleeve)

Installation is simple and utilizes the factory power supply (only draws about an additional 140mA). See wiring diagram in pictures. Mounts with any 3mm x 5-8mm screw, should be able to find them in your spare parts bags.

Print flat along the bottom (the side with the mounting holes). Recommend 0.2mm layer height. Prints great on a MK4 with input shaper enabled.