RIS Under Desk Adapter + Cable Organizers + Phone / Keyboard / Controller modules

This is RIS adapter (that long funny metal thing that is on most modern guns) for your desk / pc case. 
It allows you to easily customize mounting of various things with included modules.

I've used it extensively to do cable management under my new desk. 

If you mount it on the side, you can use it to mount various accessories, like game controllers, phone/tablet, or keyboard for example.

Included RIS adapters allows you to use it with Cooler Master QUBE 500 PC Case.

Modules should slide pretty loosely into the rail, then use “ris_security_clips” to secure them on rail. For larger modules (PSU / USB HUB ones, or lenovo tiny grippers), you need to print two of them, they're symmetrical. Look at gif below.

Controller modules / Tablet/Keyboard/Phone modules can be mounted on the side or on the top of the case, depending where you put the rail:

Sample printing project should show you orientation of elements to print, as well give settings (basically, 3+ perimeters, ironing, 0.2 layer is fine. Shouldn't require supports at all).

Please note that as per contest date, the pc case wasn't available to be purchased physically to me, so all measurements for clips are done according to sample 3d files provided from CM / PRUSA, and were not tested on actual case. Under-desk mounts however, were tested and used extensively. 

v0.1 - initial commit.

v.02 - added cable anchor, cable hook, two wider cable spinners, removed hex holes from spinners due to problems with printing on some faster settings, reorganized folders.

v.03 - added U3CHARGEHUB16 mount and Ugreen CR125 card reader. Added horizontal hole for cable sticking out off-center of small PSU.

v.04 - added 105mm ris for singular hooks, added BASEUS TRACTION SERIES cable retractor, in single and triple confuguration. Split model to separate objects and rotate accordingly. Added sample printing project for new parts as well.