BlueSCSI DB25 External case (For v2)

This a NES Like glove fitting for BlueSCSI v2 external DB25 adapter,
This version fits all Macintosh DB25 SCSI external bus (It has been design to fit IIci, IIcx, Quadra 700 or PowerPC 6100).

You need to PAUSE the print in order to add the SCSI Insert (printed before hand) so it's flush with the case and could allow a 5mm LED to be added to make the SCSI Logo glow.

On the TOP case you will need an M2.5 insert (d3.5×5mm). To close the case use a M2.5 screw x 6mm.

and using a screw to close the case
To close the case, 2xM2.5 screw are passing through the mounting holes of the DB 25 connector and PCB (You will need to modify slightly your DB25 connector to allow this to work properly.)

The SCSI Insert and Activity Light guide are printed in 0.12 while the rest of the case is printed with 0.2 height.

To get the SCSI Logo to glow, you will need to add the LED as shown on one of the printer as I was unable to actually design a Light guide that could guide the small smd LED be any useful.