1/18th scale crawler rope bridge pieces

This is a set of small bridge "planks" that can be printed to make a bridge any size you want. All of the planks are wide enough for a 1/18th scale crawler and smaller. They have a 4mm passthrough hole for the "rope" sized to fit standard 550 paracord.

Current planks:

1. Regular old flat plank
2. Skeleton lightweight and less filament plank
3. Rotten wood style plank with holes and parts missing
4. A more industrialized plank with a lot of holes running through it.

I added some spacers, both whole (slide on between the planks) and split (slide on ot off after the bridge has been made). The spacers aren't tested so if they need some fine tuning let me know.

I might add more as I continue modeling parts for my crawler course.

Print flat and no supports needed.

If you are having trouble getting the paracord through the holes, I found this video useful: https://www.youtube.com/watch?v=xi56_icWKrk

OTHER RC MODELS

RC bridge can be found here: https://www.printables.com/model/600421-118th-scale-crawler-bridge or https://www.thingiverse.com/thing:6206353

RC whoops here: https://www.printables.com/model/600420-118th-scale-whoops or https://www.thingiverse.com/thing:6206362

RC Rope bridge here: https://www.printables.com/model/600418-118th-scale-crawler-rope-bridge-pieces or https://www.thingiverse.com/thing:6206529

RC Teeter Totter here: https://www.printables.com/model/613825-118th-scale-teeter-totter or https://www.thingiverse.com/thing:6264443

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

.32

Infill: 

10%

Filament: any PLA any

Category: R/C Vehicles