Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Esun Brown Transmission Distance: 1.5
- PLA CC3D Orange Transmission Distance: 7.4
- PLA Sunlu Beige Transmission Distance: 8.2
- PLA Kingroon White Transmission Distance: 7.8
Swap Instructions:
- Start with Black
- At layer #20 (0.92mm) swap to Brown
- At layer #23 (1.04mm) swap to Orange
- At layer #28 (1.24mm) swap to Beige
- At layer #33 (1.44mm) swap to White for the rest.
Category: Other
License:
Creative Commons — Attribution — Noncommercial — Share Alike
cyanidesugar
