TPU Replacement soft jaws for Cannon plug pliers

This print is a set of replacement soft jaws for aviation/electrical cannon plug pliers.

These pliers are also excellent for other general work when you don't want to mark up the finish of what you are trying to tighten/loosen.

Print in TPU, with at least 10 perimeters, and vary the infill to your desired flex.

They were a slightly snug slip fit into my pliers, if they are too loose in yours, secure with a dab of hot glue or slightly increase the overall model size.

I used Inland TPU on the Sainsmart TPU setting in prusa slicer and they printed OK.

Unfortunately i do not know the brand my pliers are.

Happy printing!