Ghost Booh Vase Mode for Halloween decoration

t chI remixed the cute Ghost Booh from BODY3D to be printed in vase mode.

With this printing method you have a nice finish and a fast print. It took on my stock CR-10 V2 only little more than 2 hours and 23g of filament.

You have a model to be printed in one color (…_single) and one for eye inlets which can be printed in different color.

At vase mode prints i recommend to use a bigger line width. With a 0.4 nozzle you can print up to 0.8mm line width, you only have to increase the temperature a bit and maybe reduce the Speed.  It  is  important to focus on the top view in your slicer that You have no open gaps.  

I printed it with 0.08 layer height and Sunlu white PETG, because it is more like a bit transparent because of less color particles and looks maybe better when illuminated. The eye inlets are Orange Prusament PETG and printed at 95% that there is a gap for some glue.

You can drill a hole at the top to hang it in the air with some fiber string for the best look like i did 😉 Additionally I illuminated it with UV-light on the amazing flying pictures!

In Cura it tells me that the models are not watertight, but i could not see any problem and also repairing the model did not changed anything, but it printed find… 😉

Would be happy to see your makes!