December 21, 2023
Description
This Fanduct must fit as is, replacing default fanduct on Ender 3 S1 (also Plus/Pro versions). I've printed with PETG(240° nozzle/75° bed)
UPD: some users told that PLA MAKE COULD BE MELTED during usage, let me know in a comments if you had such behavior.
The airflow become much effective, especially on the back side of model.
Strong recommendation for print settings!!!
Tree supports, touching bed only, do not use supports inside the model, it will block the airflow!
LAYER HEIGHT - 0.1mm, NOZZLE ≤ 0.4mm
because walls are very thin - only 0.4mm.
Model is very light, only ~ 4g.
All comments and requests for improvement are welcome!
Cheers!
License:
Creative Commons — Attribution — Noncommercial
7
Denys Savchenko
