ATX Power Supply Bracket - Very Low for NR200/P

A lower ATX PSU bracket for the NR200P to allow both top fans (25mm thick) to be installed. Will be a tight fit using the included push-pin mounting but will work. I removed one side for TG/display purposes and removed the perforations on the back for installing the PSU facing the front (for intake).

Lots of caveats before using this so some base measurements to consider:

Max PSU depth: 140mm
Max GPU length: ~ 9.5in / 240mm

But you can likely install a deeper PSU if you have a shorter GPU….

…Or on my extreme case, fitting a short PSU (CX550-F RGB, 140mm) and a long GPU (Asus Strix 2070, 300mm). The GPU is just long enough not to cover the modular ports for the 24pin ATX/EPS12v/GPU (sata/molex modular ports are blocked). (see photo for result)

As with different parts, YMMV.