Just Cuz' 2306.5 Motor (Print in Place)

This file uses custom supports to allow the prototype motor to rotate once complete. These supports can easily be removed in a minute with 3D printer snippers. Listed below are the settings I used for my print:

-SUPPORTS OFF

-0.2mm height

-50mm/s print speed

-Fans on at 100%

-Skirt on

-20% infill with grid pattern

-200C nozzle temp, 60C bed temp

-Print with PLA

You can buy the real version of these motors here: https://justcuzrobotics.com/products/23065-1000kv-brushless-motor