Model reveres designed from damaged buttons. Original springs are reused.
Design made for Friatec part no: 33 10 01
Print instructions:
- adjust wall line count to chive strong upper brim 3 up to 5 ,
- bottom thickens - min 4 layer for good quality of the presentation site,
- print 6 hooks - use the same or different material to with well tuned flow rate - PLA is good for it springiness.
Assembly instruction:
- hooks might to be chamfered with sharp blade to make the assembly easier,
- a cleanup of hooks socket might be required - inspect the parts and have sharp blade ready ;)
- just push the hooks into slots in buttons with firm pressure - they are dovetailed with relieve slot,
- check the fitment of buttons with hooks in the panel. If hooks don't engage enough warm up the hook beam with a lighter and slightly bend it forward to adjust the engagement. See photo for smoke marks ;)
- put the springs, put buttons and use!
- dont't worry if central push rod will snap - this is a flaw it the front face mechanism design. Just keep the part inside the guide hole it will keep working.
This project is the update for:
https://www.printables.com/pl/model/423906-friatec-toiletflush-buttons
Loosiu
