Umikot53.5 - Sage/Breville WDT tool

As there was no 54mm version of v2 Umikot I decided to remix it myself. Tested it on stock Sage Bambino Plus double portafilter and a cheap basket I got with a bottomless portafilter. 

Used the Umikot58 - Mech V2, Umikot58 - Spin Ring V2 NoHandle, Umikot58 - Stand NoTab and Umikot58 - Base V2 25mm NoTab 5x3Mag as the base models. If someone needs other models to be scaled to 53.5mm let me know.

For the needles, I had to cut them 0.5mm shorter as the actual depth of double shot baskets is 24.5mm.

Printed from PETG with 0.6mm nozzle. Might not be the best model to print in PETG as some needles couldn't go all the way to the bottom. Still works fine with a bit of handle sticking out.