ScrewDriver & Plier Holder

Everything is easy to print, without supports,

There are 2 type of screwdriver holder 

1. with out guide
2. with guide (this increase print time, in the 3mf file is with guide)

Assembly :

You will need 4x M3x6 slotted head screws for assembly the bottom and side's.(the hole for screw is 9mm including bottom part)

as for the screw driver holder I used superglue.

If you slice yourself the stl's you will need 3x Plier_Holder.

1. take one left or right side and first insert the 3x plier holders as in the picture ( you may need a bit off force or lightly hammer it  )
2. insert 4x M3x6 screw in the bottom part till will come a bit out on the other end this is good for bether fixing the 2 side.
3. place the assembled 2side and plier holder on the bottom and screw in the screw but not to tight not to damage the printed part.
4. glue the screwdriver holder ( with guide or with out the guide you decide )

Print instructions

Printer Brand: Prusa

Printer: MK3S+

Rafts: No

Supports: No

Resolution : 0.2 you can try 0.3

Infill: 15%

Filament :
Devil Design PLA > Black (this I had on hand :) )

Notes: 
Any material does the trick.
Standard for 0.4 nozzle I used Prusa Slicer