Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA CC3D Orange Transmission Distance: 7.4
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Dark Blue
- At layer #9 (0.8mm) swap to Teal
- At layer #15 (1.28mm) swap to Orange
- At layer #27 (2.24mm) swap to White for the rest.
Category: Other
License:
Creative Commons — Attribution — Share Alike
cyanidesugar
