Lovely and quick Superman Hueforge Print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA META Sunlu Red Transmission Distance: 4
- PLA Sunlu Beige Transmission Distance: 8.2
- PLA Default White Transmission Distance: 5
Swap Instructions:
- Start with Dark Blue
- At layer #12 (1.04mm) swap to Teal
- At layer #14 (1.2mm) swap to Red
- At layer #20 (1.68mm) swap to Beige
- At layer #23 (1.92mm) swap to White for the rest.
Category: Other
License:
Creative Commons — Attribution — Noncommercial — Share Alike
cyanidesugar
