October 6, 2023
Description
The PSU holder (https://www.thingiverse.com/thing:2491547) and the Tevo Tarantula Brackets (https://www.thingiverse.com/thing:1457449) are not really compatible...
So I smushed them together in Tinkercad. Here you go, about five years too late!
https://www.tinkercad.com/things/0eT4uec8F4Z
Use M4x10 screws and the printed M4 nut holder (or expensive rolling T-nuts) to install. If you want the power switch, you should search for "Power Cord Inlet Plug Socket" on Ali express, and you will also need 14AWG wire, spade & fork connectors and crimpers and two M3x8 or larger screws.
Printer:
Voron 2.4
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
eSun ABS+Black
Notes:
3 walls thickness for strength.
License:
Creative Commons — Attribution
7
Steve Hanov
