ZX Spectrum +3, Amstrad CPC6128/664/FD-1 & Tatung Einstein GoTek USB Floppy Emulator Internal Caddy (3" Drive Replacement)

A Gotek USB Floppy Emulator Caddy that fits systems that have an internal 3 inch disk drive such as the ZX Spectrum +3 and Amstrad CPC6128, 664 & the external drive enclosure FD-1.

The front plate has holes for the standard gotek board (green led, two buttons and a usb socket), a rotary encoder (KY-040 type with no circuit board) and a 128x32 0.91" OLED display. Within the print is a cap for the OLED socket. This just slots in the top to secure the display. There are two included for the two different sizes of display I've seen (one slightly shorter).

All the screw holes on the left & right hand sides line up with the CPC & Spectrum case, and you can use the existing case screws that secured the original drive.

I've added a slightly modified version (_cspace) which gives a little more room for the capacitors on the OLED top and bottom. Some of the OLED boards have the caps very close to the edge of the PCB and these can rub against the holder possibly causing damage. New version has a 1mm gap to stop this.

Have also added an STL to only print the OLED holder top just in case you misplace them.

Added a slightly different version with an extra 5mm height on the front plate in order to fit the Tatung Einstein computers.

Added another version with a thinner rotary base for encoders with smaller threads.

For info on how to set one of these up please see http://tomdalby.com/other/gotek.html

*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+