Bambulab Nozzle Wiper - Easy Print - No Supports or Rafts

I did not like the original print when I used auto orient and printed it without supports. 

This model eliminates the need for using supports and makes it easier to print. Uses common m3x6mm screws to install. 

Assembly Instructions: 

• Just lay it flat and print without supports
• Cut the 4mmptfe tube to length to fit the inside
• Enlarge the ends of the PTFE with a Philips or allen key for easier screwing 
• Use two m3x6mm (m3x4mm if works) screws to install the tube 
•  

Printing Instructions: 

• Material: ABS or at least PETG for high temp and sturdiness
• Infill: 100% 
• Supports: No 
• Rafts: No 
• Brim: No