Modular Traffic/Construction Cone (Tabletop Miniatures)

Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later.

Suggested print settings (for Prusa machines, others may need some tweaking):

• Layer height 0.2mm.
• Infill 15%.
• Perimeters: 5 (for strength).
• No supports are needed but follow the suggested print orientation for ideal results.

Slight effort may be required when initially screwing the parts together. If you encounter tight threading, try threading the parts back and forth a couple of times before fully threading them in.

NOTE
While this design functions fine on a Prusa Mini and MK4 (the machines I primarily tested my designs on), I've received feedback regarding the screw thread compatibility on some other brands. After testing it on a friend's Ender 3, I now understand the issue. I've made some refinements since then, but please be aware that this problem might persist on some machines until an improved version is available.

Changelog

• 17 Nov 2023: V3 - Further refined the screw tolerance for an improved assembly experience.
• 31 Oct 2023: V2 - Refined the screw thread for smoother fastening.
• 13 Oct 2023: Introduced 2 new bases for creating 2 additional sizes - Small and Mini.