October 7, 2023
Description
Stupid Amount Of Cooling
This auxiliary fan mod lets me print PLA with a much higher speed on my voron trident. It was designed around gdstime 12032 fans.
The fans are held in place using M3*6 BHCS which are screwed into heat set inserts which are melted into the fan body. The fan holder needs 2 M5*6 screws. The slots in the fan holder are 20mm long so this mod can also be used with the longest of melt zones.
The slots have a sacrificial bridge which needs to be removed before use.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
HandsomePotato
