Ender 3 Left Side Display Extension

I made this for attaching my “Ender 3 Display Housing for CR-10” on the left side 40x40mm extrusion of my Ender 3 Pro.

I first tried attaching that display housing as is on the Ender 3 Pro frame, but even with it mounted fully forward, the Satsana hotend fan duct I'm using interfered.  This is a simple “L bracket” that mounts on the face of the 40x40mm extrusion atop the electronics enclosure front face.

For installation, this bracket should first be attached to the front underside of the “A10S_Display_Stand.stl” using two M4x6mm screws.  Attach the stand and bracket to the frame using the two M5 screws connecting the electronics enclosure to the front of the 40x40mm extrusion, and two M4 screws with T-Nuts to the top of the extrusion.  The rest assembles per the instructions for the display housing.

The display housing for which this bracket is intended is at:  https://www.printables.com/model/551280-ender-3-display-housing-for-cr-10-a10s-etc