October 8, 2023
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
(You can use multiple layer heights up for 0.2mm up to 1.0mm so you save time printing the base)
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA Sunlu Meta Red Transmission Distance: 2.8
PLA Elegoo Yellow Transmission Distance: 3
PLA PolyLite White Transmission Distance: 3.5
Swap Instructions:
Start with Black
At layer #22 (1.04mm) swap to Meta Red
At layer #34 (1.52mm) swap to Yellow
At layer #38 (1.68mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Mathoose
