Sinc Keyboard Tenting Kit

This is a tenting kit for the keeb.io Sinc Keyboard with macro section. It provides a base tent of 5°, with adjustment increments of 2.5°.

Notes

• The “Mounting Piece” is attached to the FR4 Bottom Plate, using the original M2 mounting screws for alignment. If you used socket head cap screws, you may be able to friction fit; otherwise use double-sided tape.
• The “Base Piece” is smooth to allow for placement of rubber feet.
• Additional “Shim Piece(s)” can be used to get to your preferred tenting angle. 

The tenting kit should not interfere with the reset holes, nor any rubber feet placed using the SKUF Alignment Tool.

This is designed for a Sinc rev4, but should work with rev2-4 (as the PCB/plates should be identical).

Printing Notes

• Printing with 0.4mm nozzle and 0.2mm layers seems to work fine (in PLA).
• The “Mounting Piece” STL is arranged upside-down for proper printing.