Magnetic Tiles Haunted House: Window Boards

Here are the window board pieces for the magnetic tile haunted house. 

I designed these to be used with 7x2 OR 6x3 round neodymium magnets.  I strongly recommend using these size magnets. These magnets do not have space to rotate. These pieces (as well as the light base piece) are the only pieces designed this way BUT all the other magnets in my designs rotate so they will orientation to the magnets in these pieces.

PLA Filament

Layer height 0.2mm

Infill 15-20%

No brims  or supports needed

Neodymium magnets needed: 6x2 

Magnetic build plate highly recommended but not absolutely necessary.

For these window boards, add a pause print at layer height 2.8mm to insert the magnets. When the print is paused insert the magnets.  After the magnets are inserted, resume the print.

Here is a link to Amazon for the light and magnets that fit into this print. That's it:)

https://www.amazon.com/shop/3dpmom