Countertop Gap Cover

Do you have little transition gaps in your kitchen counter that are an annoying collecting place for assorted gunk? This is a kitchen counter gap cover that fills in that gap in a sleek and unnoticeable way. Simply place this gap cover in the gap, and you never have to worry about cleaning all the little pieces of stuff out from that gap ever again. This cover is especially meant for transitions where there are variations in height, for example, the transition between the countertop and a stove.

File Variations

There are variations in length of the gap covers. Please take note of this and print the files that apply to your situation.

Installation Instructions

• Measure the length of the gap you want to fill in
• Also measure the size of your gap
• Then print the gap cover files that fit your needs
• Do not forget to print the cap pieces for either end
• Piece the different printed pieces together
• Then place the assembled set of pieces in the gap
• Depending on how often the gap cover is bumped, and how tightly it fits into the gap, you may want to secure the gap cover to the counter with some double-sided tape

Printing Instructions

• Material: PLA or PETG (heat resistance, water resistance or extra durability)
• Supports: No
• Orientation: Print the files with the back (the side with the dovetail joint) on the print bed

If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.