Sharingan eyes - Magnets/coasters

Set of 5 different Sharingan eyes in the form of “magnets”. These are made for a multicolored machine. I went with the 5 I thought were the most common or recognizable. If you wish to see a specific one, let me know!

I reused this design to go with the coaster holder I made which you can find here.

These are designed to change filament as little as few times as possible which is why they all have a solid colored back. 

The basic Sharingan uses a one layer overlap technique to give the lines that are meant to be there a darker red effect while still using two colors. 

If you'd like to help me out or have permission to sell physical items from my designs, please join my club!

For magnets, I use these with some glue: https://www.amazon.com/dp/B0753ZPBLQ

For cork bottoms I use these: https://a.co/d/c7CN0dR 

Special printing instructions:

0.3mm layer height with 0.4mm nozzle works well

If using for coasters with the holder:

X scaling - 100mm

Y scaling - 100mm

Z scaling - 3.5mm