October 11, 2023
Description
Leica Style lens hood designed to fit where the filter would go on a lens. You can also put it on a filter that has the extended part for adding other filters on it and it was tested with multiple lenses, there is no vignetting. Its supposed to be a perfect fit, if you try to screw it in like a filter the thread on the lens will grab on it and it will not fall off.
Printed with 0.1 layer height on Ender 3 Pro. The pictures you see are the results of sanding them for like 5-10 minutes with 400 then 600 grit sandpaper.
Let me know if there is any diameter you need this to fit and i will modify and upload the files for it.
License:
Creative Commons — Attribution — Noncommercial