Umbrella Tip Replacement

This is a replacement part for repairing the tip of the umbrella.

As long as the tip of the umbrella has a UNC1/4 screw, it will fit any manufacturer or model.

Show off your individuality by adding your own original design.
 

Even users who are not familiar with CAD can create original designs.
 

Find a design you like and use PrusaSlicer's merge function to create your own original umbrella. 

*The Josef umbrella in the sample photo is a combination of the model published by Prusa Research. This model is not included.
 

■base design

For the merge function of PrusaSlicer.

2 types of screw lengths and 2 types of diameters.

• Tripod_screw_dummy_D10mm_xH14mm.stl
• Tripod_screw_dummy_D10mm_xH7mm.stl
• Tripod_screw_dummy_D8mm_xH14mm.stl
• Tripod_screw_dummy_D8mmxH7mm.stl

- Merge manual

Step1:  Load the model you want to combine into PrusaSlicer.

Step2:  Load the above screw parts into PrusaSlicer.

Step3: Lower the screw parts by the height.

Step4: Merge all parts.

Step5: Restore height, add supports as needed, and print.

■sample design

- Basic design

2 types of screw lengths.

• umbrella_tip_basic_H6mm.stl
• umbrella_tip_basic_H13mm.stl
• umbrella_tip_basic_withHole_H6mm.stl
• umbrella_tip_basic_withHole_H13mm.stl

- Unique design

• umbrella_tip_star.stl
• umbrella_tip_sphere.stl
• umbrella_tip_sphere_smile.stl

■Notes on printing

If you are concerned about strength, it is better to have a circumference of 4 or more.

Print with ABS or PETG.