Snatchblock Mini Pulley - 608 Bearing

A smaller version of the Snatchblock Plus. Try the Skeleton Zero Mini or the Pure Zero Mini if you don't have the M3 bolts.

Light duty - 25lbs max

Dimensions - 70mm x 33mm x 19mm

Required hardware

1x - M3 16mm hex socket cap bolt
1x - M3 nut
1x - 608 bearing

Printing

Requires printed supports. For best looking results place each half of the snatchblock face-up on the build plate and generate a good support. A dense support interface layer will improve the part finish. The wheel can be printed without support.