Basil Hook-On system - Hook

Replacement Hook for the Basil Hook-On system used by BASIL on their rear bicycle bags.

Tested with 10kg load in the bag on a short ride. (Please note every bag has two of these hooks)

I did it this way (Print suggestion):

• PETG
• 6 Walls. Important to make most parts of the hook solid.
• 4 Top and 4 Bottom Layers
• 0.2 Layer Height
• 25% Infill - Grid pattern. (not really needed as there is no mechanical stress on the parts where the infill will be if you choose 6 walls.)

Filament used with the above settings: ~14g