October 12, 2023
Description
Anti-vibration mount for Cube autopilots using the Mini Carrier Board from CubePilot.
I sourced the silicone ball mounts at this link on Amazon.
The skeletonized bottom plate has easily accessible 3mm mounting holes. A solid bottom plate STL file is included for use with mounting tape/adhesive (or for easier modification in software such as OpenSCAD).
Recommend PETG, ASA, ABS, or Nylon.
Note: Recommend NOT using this mount for most applications. Instead, mount your autopilot rigidly to the frame or use thin foam/mounting tape. However, if you need a compliant mount for use on a combustion engined vehicle or similar, this should do the trick.
License:
Creative Commons — Attribution
9
Yuri Rage
