Darksaber remix that fits on Prusa i3 MK3 and MK4

I tweaked the Fusion 360 file from Adafruit and the Ruiz Brothers so that the entire project will fit on a Prusa i3 MK3 WITHOUT having to glue anything that wasn't glued in the original. This required shortening the handle, rotating the speaker mount and shortening it, shortening the blade base and tip, moving the power button, scaling the stand, and a couple other things I forget. 

I'm including the tweaked Fusion 360 file as well as all of the STL files needed. 

You will have to be very clever about your placement on the print bed, the blade parts only fit at an angle from corner to corner, but I assure you they do fit. I've included 3mf files for the parts that go diagonally. Everything is printable without supports and works well. The only part that might need tweaking is the Pommel. It's a little loose, but I just shimmed it with some tape instead of reprinting. 

ALSO: You only need 1 meter of the thin NeoPixel strips, which is WAY cheaper than buying 3 meters from Adafruit (you can get them on Amazon for less but support Adafruit where you can!).

All of the assembly instructions are the same as the original, which are quite complete and well done. My kid loves this thing!