Playseat Revolution - Wheel support

My rigs wheel felt a bit flimsy. So I created this support which makes a world of difference.

Additionally you will need:

• two 6 mm bolts (for the top part).
• four 6 mm bolts (for the bottom part).
• some fixing band for the bottom part. IMO there is no space to print anything sturdy under the shaft with so little space, so I used metal band there (picture included)
• two 8x50 mm bolts for the joints.

You can print some knobs for the bolts, but I tightened them with wrenches.

Please also check my pedal support for the same rig.