Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. 
Allows easy and one-handed screwing without the screw falling off the bit.

You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz

Place the screw claw on the front of screwdriver / bit and insert the screw. Then tighten the screw as usual. The screw is held by the clamp and does not fall out, even upside down / over head.

The claw is available in two options:

1. Two-piece set for larger screws
2. One-piece claw for smaller screws

Print in PETG for flexibility. Remove stringing if necessary.

--

Schraubkralle um Schrauben beim Anziehen mit dem Schraubendreher oder Bit zu fixieren. Ermöglicht einhändiges Verschrauben, ohne ein Runterfallen der Schrauben.