Raspberry pi4 HQ camera (aluminium mix)

A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure.

I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front.

During the development of my web application for the RPI zero, I needed more performance to try different libraries. 

https://github.com/Lillifee/raspiCam

https://www.prusaprinters.org/prints/48519-raspberry-pi-zero-webcam-hq-camera

I'm still searching for a short black camera cable for the raspberry. Only found long flat cables until yet. Leave me a comment if you have a tipp where i could find one.

PS: Attach the camera cable before assemble! :D

Parts:

I'm sure you will find another back part if you don't have or want to buy the aluminium case.

Aluminum case:

https://www.amazon.com/GeeekPi-Raspberry-Aluminum-Dissipation-Heatsink/dp/B085XPHY77/ref=sr_1_9?dchild=1&keywords=raspberry+pi+aluminum+case&qid=1616838099&sr=8-9

or

https://www.reichelt.at/at/de/gehaeuse-fuer-raspberry-pi-4-alu-schwarz-rpi-case-alu07-p261677.html?PROVID=2807&gclid=CjwKCAjwr_uCBhAFEiwAX8YJgQYlrT8CWcLM2KFZ7IxWB73pTj5eZTboXcIG8jsWetNK5hnNzTKxnhoCpMIQAvD_BwE

Screws:

• Camera: 4x M2x8
• Raspberry: Re-used from the aluminum case.

Filament:

• Front: Prusament PETG JetBlack
• Bottom: Prusament PETG Pistachio Green

I used the infill trick for the top part with a 30% honeycomb infill.

As usual, you will find the blender files to adjust it to your needs.